VA3 Pro
3-Channel Vibration Analyzer, Data Collector and Many More
Alat analisis getaran yang sesungguhnya
FFT waktu nyata, bentuk gelombang waktu, dll.
Berbasis modular
beli hanya mode yang Anda butuhkan
Antarmuka yang mudah digunakan
mode keseimbangan grafis
Apa saja yang ada di dalamnya ?
Pilih aksesori Anda
Sesuaikan kit VA3 Pro Anda.
Pilih sensor akselerasi sumbu tunggal atau sensor triaksial untuk pengumpulan data harian Anda.
Probe kecepatan akan diperlukan untuk pekerjaan penyeimbangan dan probe ultrasound untuk deteksi kebocoran.
Tidak ada masalah dalam mengukur Orbit, Garis Tengah menggunakan probe Kedekatan.
Fleksibilitas & konektivitas
VA3 Pro
- 3x AC input – vibrations
- 3x DC input – process values
- 1x Trigger input (speed probe)
- Triaxial sensor ready
- IR temperature sensor
- LED stroboscope / flashlight
- Fast USB 2.0 communication
- Robust Push-Pull connectors
Input channels:
3 x AC, ICP® power supply on/off
3 x DC for process values
1 x TACHO for speed probe / external trigger
3 x DC for process values
1 x TACHO for speed probe / external trigger
Input range:
AC +/- 12 V peak-peak
DC +/- 24V
AD conversion:
24 bit, 64 bit internal signal processing
No AutoGain function!
Dynamic range S/N:
120 dB
Frequency ranges (-3 dB):
Maximum range: 0.5 Hz – 25 kHz (64 kHz sampling)
Minimum range: 0.5 Hz – 25 Hz (64 Hz sampling)
Sampling mode:
Fully simultaneous for all 3 channels
FFT resolution:
Min. 25 lines
Max. 25 600 lines
Measurement modes:
Analyzer – analytical measurements
Data collector – route measurements
Balancer – 1 and 2 plane on site balancing
Recorder – raw signal recording for later post analysis
Run Up – run up and coast down measurements
Ultrasound – measurement of ultrasound in 30 – 50 kHz range
LED stroboscope, LED torch
FASIT – Expert system for automatic fault detection
Vibration meter – basic vibration measurements
Software:
Free version of DDS software (limited database size)
Licensed DDS software
Data processing:
Real time FFT
DEMOD – ENVELOPE analysis
ACMT – low speed bearing analysis
Order analysis
User band pass analysis
RPM measurement
DC measurement
Orbit measurement
IR temperature measurement:
From -70˚C to +380˚C (-94˚F to +716˚F)
Trigger:
Manual, External, Amplitude, Tacho
Display:
Colour 240 x 320 pixels, TFT
Interface:
USB 2.0, 3.0 compatible
Operating temperature range:
-10˚C to +50˚C
Power:
Battery pack for more than 10 hours of continous operation
Case:
Aluminium – heavy duty (optionally with IP65 rating)
Weight:
780 g
Users Today : 108
Users Yesterday : 78
Total Users : 123855